SITE
SETUP
SKU: 6190-NCS300T
SealForce Neutral Clear Silicone is a translucent, quick-cure sealant for formwork and precast joints on tilt-up and general construction sites. An uncured or poorly matched sealant can shrink, discolour, or pull away from the joint face, leaving a gap for water and debris to get back in after the panel is stripped. SealForce cures on a neutral system rather than an acetoxy one, so it stays non-corrosive against metal fixings and doesn't attack the substrate as it sets. Once cured, it stays permanently flexible, which lets it move with the joint instead of cracking out. A 300ml cartridge covers approximately 15 lineal metres on a 5mm bead, enough for a typical run of formwork joints before reloading the gun. It's suited to precast panel joints, formwork seams, and general weather sealing on metal, glass, timber, and concrete substrates, and comes 24 cartridges to the carton for crews running through volume.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
SealForce Neutral Clear Silicone is a translucent, quick-cure sealant for formwork and precast joints on tilt-up and general construction sites. An uncured or poorly matched sealant can shrink, discolour, or pull away from the joint face, leaving a gap for water and debris to get back in after the panel is stripped. SealForce cures on a neutral system rather than an acetoxy one, so it stays non-corrosive against metal fixings and doesn’t attack the substrate as it sets. Once cured, it stays permanently flexible, which lets it move with the joint instead of cracking out. A 300ml cartridge covers approximately 15 lineal metres on a 5mm bead, enough for a typical run of formwork joints before reloading the gun. It’s suited to precast panel joints, formwork seams, and general weather sealing on metal, glass, timber, and concrete substrates, and comes 24 cartridges to the carton for crews running through volume.
| Specification | Details |
|---|---|
| Volume | 300 ml |
Download your SealForce Neutral Clear Silicone - 300ml resources:
About SealForce Neutral Clear Silicone - 300ml
SealForce Neutral Clear Silicone seals formwork and precast panel joints, along with general glazing and weather sealing on metal, glass, timber, and concrete. It's a translucent, quick-cure sealant that stays permanently flexible once cured.
A neutral cure won't corrode metal fixings or attack the substrate it's applied to, unlike an acetoxy silicone. This makes SealForce suited to sealing against metal formwork and fittings.
One 300ml cartridge covers approximately 15 lineal metres on a 5mm bead, which typically covers a standard run of formwork or precast joints before reloading.
No. SealForce bonds directly to metal, glass, timber, and concrete without a separate priming step.
Yes. SealForce is designed for both indoor and outdoor formwork and glazing applications and stays permanently flexible once cured.
SealForce Neutral Clear Silicone is supplied 24 cartridges to the carton.
