SITE
SETUP
SKU: ZD37
The ZipWall ZipDoor Standard is a pre-made temporary dust door for sealing doorways during renovation, fitout, demolition, and construction works. The 1.2m x 2.4m unit attaches to the doorframe with a double-sided frame tape that protects the surface, creating a sealed perimeter around the opening in under a minute without tools or ladders.
Open doorways are one of the most common dust migration paths on fitout and renovation sites. Pushing a loose sheet against a frame doesn't seal it — dust moves through the gap at every edge. The ZipDoor uses 100 micron plastic sheeting with pre-installed heavy-duty zippers on both sides, giving workers a clean, sealable entry and exit that closes completely on every pass. The double-sided frame tape leaves no adhesive residue on painted, timber, or MDF doorframes.
Flap hooks hold the door fully open for unobstructed access when the opening needs to be clear. Known on NZ sites as a temporary dust door or zip door, the ZipWall ZipDoor Standard is used by interior fitout contractors, renovation crews, and site managers on commercial and residential projects wherever a doorway needs to be sealed fast and reopened cleanly throughout the job.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
The ZipWall ZipDoor Standard is a pre-made temporary dust door for sealing doorways during renovation, fitout, demolition, and construction works. The 1.2m x 2.4m unit attaches to the doorframe with a double-sided frame tape that protects the surface, creating a sealed perimeter around the opening in under a minute without tools or ladders.
Open doorways are one of the most common dust migration paths on fitout and renovation sites. Pushing a loose sheet against a frame doesn’t seal it — dust moves through the gap at every edge. The ZipDoor uses 100 micron plastic sheeting with pre-installed heavy-duty zippers on both sides, giving workers a clean, sealable entry and exit that closes completely on every pass. The double-sided frame tape leaves no adhesive residue on painted, timber, or MDF doorframes.
Flap hooks hold the door fully open for unobstructed access when the opening needs to be clear. Known on NZ sites as a temporary dust door or zip door, the ZipWall ZipDoor Standard is used by interior fitout contractors, renovation crews, and site managers on commercial and residential projects wherever a doorway needs to be sealed fast and reopened cleanly throughout the job.
No specifications available for this product.
Download your Zipwall ZipDoor Standard - 1.2m x 2.4m resources:
Zipwall ZipDoor Standard - 1.2m x 2.4m does not have any Safety Data Sheets. Request here
About Zipwall ZipDoor Standard - 1.2m x 2.4m
The ZipWall ZipDoor Standard seals a doorway during construction, renovation, or fitout works to stop dust and debris spreading into adjacent areas. It attaches to the doorframe with double-sided tape and provides a walk-through entry via pre-installed zippers on both sides of the sheeting.
No. The double-sided frame tape is formulated to protect the frame surface and removes cleanly from timber, MDF, and painted frames without adhesive residue. Avoid using the ZipDoor on doorframes with flaking, unsound, or freshly painted surfaces where the tape removal could lift the finish.
The ZipDoor attaches using a special double-sided tape applied around the full doorframe perimeter. The tape bonds the sheeting to the frame on all four edges, creating a sealed perimeter. No tools, tacks, or staples are required.
The ZipDoor Standard measures 1.2m wide x 2.4m high, sized to cover a standard single doorway. For wider doorway openings, the ZipDoor Standard 1220 x 2440mm (ZD48FR) provides an alternative size option.
Yes. Flap hooks on the ZipDoor hold the sheeting fully open against the frame or wall when the opening needs to be clear for materials or equipment. Close the zipper when re-entering the sealed zone to restore the dust seal.
The ZipDoor uses 100 micron plastic sheeting — robust enough to resist tearing under regular use while remaining flexible and easy to handle during installation and removal.
Yes. The ZipDoor sheeting and zippers can be reinstalled at a different doorway on the same project. New double-sided frame tape is required for each reinstall as the original tape does not re-bond after removal.
Yes. Temporary dust door, zip door, plastic dust door, and construction barrier door are all common names for the same product type. The ZipWall ZipDoor Standard is a pre-made unit of this type, designed for fast installation on standard doorways without cutting or fabricating a barrier from scratch.
Zipwall ZipDoor Standard - 1.2m x 2.4m
We suggest following the steps above for the best installation results. If you have any questions or need assistance, our team is here to help.
