SKU: KXZ180920
SDS Max Masonry Drill Bit 18mm x 920mm is an extra-long heavy-duty hammer-drill bit for drilling deep plug and fixing holes in concrete, masonry and stone. Reaching through thick walls or deep foundations calls for a bit long enough to finish the hole in one pass, and reinforced concrete, natural stone and dense masonry blunt an ordinary bit fast along the way. This bit uses the SDS-max W2 TURBOHEAD Xpro design: a W2 helix with asymmetrical shovel-shaped entry grooves and large-volume double hauling flutes clears drilling dust fast, while the depth-offset full carbide head and X-cutting, 2x2 cutting concept stop the bit locking in reinforcement and keep the hole exactly cylindrical even in armed concrete, even over its full 920mm reach. Chrome-nickel-molybdenum steel construction is shot-peened and hardened to an intermediate level, with the carbide head high-temperature brazed at about 1,120°C for a bond that holds under heavy impact. It fits directly into SDS-max and HILTI TE-Y drive hammer drills and is made in Germany. At 18mm diameter and 920mm long, contractors and tradies reach for this bit for through-wall drilling and deep service penetrations in artificial stone, masonry, natural stone or reinforced concrete.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
SDS Max Masonry Drill Bit 18mm x 920mm is an extra-long heavy-duty hammer-drill bit for drilling deep plug and fixing holes in concrete, masonry and stone. Reaching through thick walls or deep foundations calls for a bit long enough to finish the hole in one pass, and reinforced concrete, natural stone and dense masonry blunt an ordinary bit fast along the way. This bit uses the SDS-max W2 TURBOHEAD Xpro design: a W2 helix with asymmetrical shovel-shaped entry grooves and large-volume double hauling flutes clears drilling dust fast, while the depth-offset full carbide head and X-cutting, 2×2 cutting concept stop the bit locking in reinforcement and keep the hole exactly cylindrical even in armed concrete, even over its full 920mm reach. Chrome-nickel-molybdenum steel construction is shot-peened and hardened to an intermediate level, with the carbide head high-temperature brazed at about 1,120°C for a bond that holds under heavy impact. It fits directly into SDS-max and HILTI TE-Y drive hammer drills and is made in Germany. At 18mm diameter and 920mm long, contractors and tradies reach for this bit for through-wall drilling and deep service penetrations in artificial stone, masonry, natural stone or reinforced concrete.
| Specification | Details |
|---|---|
| Diameter | 18 mm |
| Length | 920 mm |
| Weight | 1.3 kg |
| Material | Chrome-Nickel-Molybdenum Steel, TURBOHEAD Xpro Full Carbide Head |
| Country of Origin | Germany |
Download your SDS Max Masonry Drill Bit 18mm x 920mm resources:
SDS Max Masonry Drill Bit 18mm x 920mm does not have any Safety Data Sheets. Request here
About SDS Max Masonry Drill Bit 18mm x 920mm
It fits directly into SDS-max and HILTI TE-Y drive hammer drills.
18mm diameter by 920mm long, weighing 1.3kg.
Yes, Powerpac also stocks an 18mm x 940mm bit (KXZ180940) for the deepest holes.
Artificial stone, masonry, natural stone and reinforced concrete.