
SKU: 6193-ZBWN15
The Z Bar Wing Nut Single Arm is a hand-tightened nut for the 15mm Z bar tie. A single wing gives you a lever to turn the nut by hand, so you can snug the tie up and strip it later without a spanner. One nut weighs about 0.28kg.
Use the wing nut with a plate or flange plate that spreads the load over the form face. Powerpac also stocks the Z bar in a 15mm x 3000mm length, along with the plate nut, flange plate and joiner.
Powerpac has not published the load rating for this nut, so get the safe working load from the formwork designer.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
The Z Bar Wing Nut Single Arm is a hand-tightened nut for the 15mm Z bar tie. A single wing gives you a lever to turn the nut by hand, so you can snug the tie up and strip it later without a spanner. One nut weighs about 0.28kg.
Use the wing nut with a plate or flange plate that spreads the load over the form face. Powerpac also stocks the Z bar in a 15mm x 3000mm length, along with the plate nut, flange plate and joiner.
Powerpac has not published the load rating for this nut, so get the safe working load from the formwork designer.
| Specification | Details |
|---|---|
| Suits Bar | 15mm Z bar |
| Wing Style | Single arm |
| Weight | 0.28 kg |
Download your Z Bar Wing Nut - Single Arm resources:
Z Bar Wing Nut - Single Arm does not have any Safety Data Sheets. Request here
About Z Bar Wing Nut - Single Arm
The Z Bar Wing Nut Single Arm tightens a 15mm Z bar tie by hand. The single wing acts as a lever for turning the nut.
The wing nut fits the 15mm Z bar. Powerpac stocks the bar in a 15mm x 3000mm length.
One nut weighs about 0.28kg.
Powerpac has not published a load rating for this SKU. Get the safe working load from the formwork designer before using the nut.
Email us directly at [email protected]
or complete the form below
Email us directly at [email protected]
or complete the form below