SKU: 6193-CBPS6BLK
The Connolly Biscuit Plate Dowel 6mm Black is a 6 mm thick steel plate dowel that transfers load across construction joints in concrete slabs on ground. The plate measures 110 x 150 mm and has a black finish. It is also called a plate dowel or biscuit dowel.
At a construction joint, the two slab edges can move up and down against each other under load. The edges then chip and crack. A plate dowel ties the slabs together for vertical load while the joint still opens and closes as the concrete shrinks.
In the Connolly system the 6 mm plate sits in a red polystyrene sleeve that is nailed to the formwork. The sleeve debonds the plate from the concrete and allows 5 mm of end movement and 10 mm of side movement each way. Powerpac has not confirmed whether this listing includes the sleeve, so ask the team when you order.
Concrete contractors and flooring crews across NZ use biscuit plate dowels in warehouse floors, slabs and pavements.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
The Connolly Biscuit Plate Dowel 6mm Black is a 6 mm thick steel plate dowel that transfers load across construction joints in concrete slabs on ground. The plate measures 110 x 150 mm and has a black finish. It is also called a plate dowel or biscuit dowel.
At a construction joint, the two slab edges can move up and down against each other under load. The edges then chip and crack. A plate dowel ties the slabs together for vertical load while the joint still opens and closes as the concrete shrinks.
In the Connolly system the 6 mm plate sits in a red polystyrene sleeve that is nailed to the formwork. The sleeve debonds the plate from the concrete and allows 5 mm of end movement and 10 mm of side movement each way. Powerpac has not confirmed whether this listing includes the sleeve, so ask the team when you order.
Concrete contractors and flooring crews across NZ use biscuit plate dowels in warehouse floors, slabs and pavements.
| Specification | Details |
|---|---|
| Thickness | 6 mm |
| Plate size | 110 x 150 mm |
| Finish | Black |
| Steel grade | AS/NZS 3679.1-300 |
| End movement | 5 mm |
| Lateral movement | 10 mm |
Download your Connolly Biscuit Plate Dowel - 6mm Black resources:
Connolly Biscuit Plate Dowel - 6mm Black does not have any Safety Data Sheets. Request here
About Connolly Biscuit Plate Dowel - 6mm Black
A biscuit plate dowel is a flat steel plate cast across a slab joint. It transfers vertical load between the two slabs while the joint still opens and closes.
The plate is 6 mm thick and measures 110 x 150 mm.
The black plate has a black finish. The HDG plate is hot-dip galvanised for slabs exposed to moisture.
The 10 mm plate carries heavier loads and allows 12 mm of end movement, against 5 mm for the 6 mm plate. Your engineer's joint detail decides the size and spacing.
Powerpac has not confirmed whether this listing includes the red Connolly sleeve. Ask the team when you order.