SKU: 6193-CBPS6HDG
The Connolly Biscuit Plate Dowel 6mm HDG is a 6 mm thick hot-dip galvanised steel plate dowel that transfers load across construction joints in concrete slabs on ground. The plate measures 110 x 150 mm. It is also called a plate dowel or biscuit dowel.
At a construction joint, the two slab edges can move up and down against each other under load. The edges then chip and crack. A plate dowel ties the slabs together for vertical load while the joint still opens and closes as the concrete shrinks.
The 35 micron galvanised coating to AS/NZS 4680 protects the steel in slabs exposed to moisture. In the Connolly system the 6 mm plate sits in a red polystyrene sleeve that allows 5 mm of end movement and 10 mm of side movement each way. Powerpac has not confirmed whether this listing includes the sleeve, so ask the team when you order.
Concrete contractors and flooring crews across NZ use galvanised plate dowels in exterior slabs, hardstands and pavements.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
The Connolly Biscuit Plate Dowel 6mm HDG is a 6 mm thick hot-dip galvanised steel plate dowel that transfers load across construction joints in concrete slabs on ground. The plate measures 110 x 150 mm. It is also called a plate dowel or biscuit dowel.
At a construction joint, the two slab edges can move up and down against each other under load. The edges then chip and crack. A plate dowel ties the slabs together for vertical load while the joint still opens and closes as the concrete shrinks.
The 35 micron galvanised coating to AS/NZS 4680 protects the steel in slabs exposed to moisture. In the Connolly system the 6 mm plate sits in a red polystyrene sleeve that allows 5 mm of end movement and 10 mm of side movement each way. Powerpac has not confirmed whether this listing includes the sleeve, so ask the team when you order.
Concrete contractors and flooring crews across NZ use galvanised plate dowels in exterior slabs, hardstands and pavements.
| Specification | Details |
|---|---|
| Thickness | 6 mm |
| Plate size | 110 x 150 mm |
| Finish | Hot-dip galvanised |
| Galvanising | 35 micron |
| Steel grade | AS/NZS 3679.1-300 |
| End movement | 5 mm |
| Lateral movement | 10 mm |
Download your Connolly Biscuit Plate Dowel - 6mm HDG resources:
Connolly Biscuit Plate Dowel - 6mm HDG does not have any Safety Data Sheets. Request here
About Connolly Biscuit Plate Dowel - 6mm HDG
A biscuit plate dowel is a flat steel plate cast across a slab joint. It transfers vertical load between the two slabs while the joint still opens and closes.
The plate is 6 mm thick and measures 110 x 150 mm.
The HDG plate has a 35 micron hot-dip galvanised coating to AS/NZS 4680. It suits exterior slabs and slabs exposed to moisture.
The 10 mm plate carries heavier loads and allows 12 mm of end movement, against 5 mm for the 6 mm plate. Your engineer's joint detail decides the size and spacing.
Powerpac has not confirmed whether this listing includes the red Connolly sleeve. Ask the team when you order.