SKU: J1009
Rapidline Pacific Maple 2440 x 1220 x 3.6 mm is an economy plywood sheet for cabinet backs and low-cost interior linings. Builders usually call this sheet 3.6 mm ply or thin lining ply.
Some surfaces never get a second look. The back of a cabinet run or the walls of a garage sleep-out rarely justify premium veneer ply. Thicker sheet adds cost and weight for no visible gain.
Rapidline Pacific Maple is graded B/CC. The B face is the better side and should face the room. The CC back goes against the framing or carcass. The timber face takes paint, stain or oil, or can be left natural.
A 3.6 mm sheet is thin enough to cut with a fine-tooth saw and fix with panel pins or glue. Each full sheet covers 2.98 m².
Joiners and fitout crews across NZ use Rapidline Pacific Maple for cabinet backs and economy wall linings where cost matters more than a feature-grade finish.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
Rapidline Pacific Maple 2440 x 1220 x 3.6 mm is an economy plywood sheet for cabinet backs and low-cost interior linings. Builders usually call this sheet 3.6 mm ply or thin lining ply.
Some surfaces never get a second look. The back of a cabinet run or the walls of a garage sleep-out rarely justify premium veneer ply. Thicker sheet adds cost and weight for no visible gain.
Rapidline Pacific Maple is graded B/CC. The B face is the better side and should face the room. The CC back goes against the framing or carcass. The timber face takes paint, stain or oil, or can be left natural.
A 3.6 mm sheet is thin enough to cut with a fine-tooth saw and fix with panel pins or glue. Each full sheet covers 2.98 m².
Joiners and fitout crews across NZ use Rapidline Pacific Maple for cabinet backs and economy wall linings where cost matters more than a feature-grade finish.
| Specification | Details |
|---|---|
| Length | 2440 mm |
| Width | 1220 mm |
| Thickness | 3.6 mm |
| Coverage | 2.98 m² |
| Material | Plywood |
| Grade | B/CC |
| Finish | Unfinished |
| Brand | Rapidline |
Download your Rapidline Pacific Maple 2440x1220x3.6mm resources:
Rapidline Pacific Maple 2440x1220x3.6mm does not have any Safety Data Sheets. Request here
About Rapidline Pacific Maple 2440x1220x3.6mm
Rapidline Pacific Maple is an economy plywood sheet measuring 2440 x 1220 mm and 3.6 mm thick. The sheet is graded B/CC. Rapidline Pacific Maple suits cabinet backs and low-cost interior linings.
Yes. Rapidline Pacific Maple is a 3.6 mm plywood, the thickness builders often call 3.6 mm ply or thin lining ply. Powerpac sells Rapidline Pacific Maple in full 2440 x 1220 mm sheets.
B/CC means the face of the sheet is B grade and the back is CC grade. The B face has fewer visible defects than the CC back. Fix Rapidline Pacific Maple with the B face toward the room.
Yes. Rapidline Pacific Maple takes paint, stain or oil on its timber face, or can be left unfinished for a natural look. Sand the face lightly before applying any finish.
No. Rapidline Pacific Maple is an economy plywood for interior finishes. Keep Rapidline Pacific Maple out of wet areas and exterior applications. Use a treated or exterior-rated plywood for those jobs.
No. Rapidline Pacific Maple is a lining and joinery plywood. The 3.6 mm sheet is not rated for structural or bracing work. Use a rated structural plywood such as CD structural ply for those applications.
One sheet of Rapidline Pacific Maple covers 2.98 m². Each sheet measures 2440 x 1220 mm.
Fix Rapidline Pacific Maple with panel pins or small countersunk screws into framing or a cabinet carcass. Add adhesive where a firmer bond is needed. Support the 3.6 mm sheet along every edge, because thin ply flexes between fixings.