SKU: EWS-3
The Endo Spring Balancer EWS-3 supports a tool or load of 1 to 3 kg and gives 1.3 m of cable travel. It hangs from an overhead point, takes the weight of the load and retracts the cable when the load is released. Workshop and site crews call this type of unit a tool balancer or a load balancer.
A spring balancer works inside a set capacity range. The EWS-3 is listed for 1 to 3 kg, so the tool and anything it carries, such as a hose or cable, must fall inside that range. The EWS-3 weighs 2 kg. It must hang from a fixing point or trolley that can carry the balancer and the load together. Powerpac has not published a working load limit or test certificate for this model, so check the Endo manual before use.
Assembly teams hang this 1 to 3 kg Endo spring balancer over a workstation to support a light tool. Typical loads are light hand-held tools.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
The Endo Spring Balancer EWS-3 supports a tool or load of 1 to 3 kg and gives 1.3 m of cable travel. It hangs from an overhead point, takes the weight of the load and retracts the cable when the load is released. Workshop and site crews call this type of unit a tool balancer or a load balancer.
A spring balancer works inside a set capacity range. The EWS-3 is listed for 1 to 3 kg, so the tool and anything it carries, such as a hose or cable, must fall inside that range. The EWS-3 weighs 2 kg. It must hang from a fixing point or trolley that can carry the balancer and the load together. Powerpac has not published a working load limit or test certificate for this model, so check the Endo manual before use.
Assembly teams hang this 1 to 3 kg Endo spring balancer over a workstation to support a light tool. Typical loads are light hand-held tools.
| Specification | Details |
|---|---|
| Capacity | 1-3 kg |
| Travel | 1.3 m |
| Weight | 2 kg |
Download your Endo Spring Balancer 1-3kg cap. 1.3m Travel resources:
Endo Spring Balancer 1-3kg cap. 1.3m Travel does not have any Safety Data Sheets. Request here
About Endo Spring Balancer 1-3kg cap. 1.3m Travel
The Endo Spring Balancer EWS-3 is listed for loads from 1 to 3 kg. Weigh the tool together with any hose or cable it carries, and choose the balancer whose range includes that weight. Powerpac has not published a working load limit or test certificate for this model, so check the Endo manual before use.
The Endo EWS-3 has 1.3 m of cable travel. The cable retracts when the load is released.
Yes. Tool balancer, load balancer and spring balancer are common names for the same type of device. The Endo EWS-3 is one of them.
The Endo EWS-3 may not hold the tool at a steady height. A tool lighter than 1 kg may not pull the cable out, and a tool heavier than 3 kg may pull the cable down. Choose the Endo balancer whose range matches the tool.
No. Powerpac sells the Endo EWS-3 for supporting tools and loads. Powerpac has not published any rating for supporting people, so do not use it for that.