SKU: 400290
The Endo Air Hoist EHL-1TS lifts up to 1,000 kg through a 3 m lift on a single fall chain. It runs on compressed air and is controlled by a pull chain. Site and workshop crews call this type of unit an air chain hoist or pneumatic hoist.
The EHL-1TS hangs from a top hook suspension, so it needs an overhead fixing point or trolley rated for the hoist and the load together. The two fall EHL-1TW has the same 1,000 kg capacity and is the alternative when a two fall chain is wanted. Powerpac has not published the working air pressure, air consumption or a test certificate for the EHL-1TS, so check the Endo manual and your site's lifting procedures before first use.
Riggers and maintenance crews use this Endo 1 tonne air hoist to lift loads over a 3 m travel. Do not use it to lift people.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
The Endo Air Hoist EHL-1TS lifts up to 1,000 kg through a 3 m lift on a single fall chain. It runs on compressed air and is controlled by a pull chain. Site and workshop crews call this type of unit an air chain hoist or pneumatic hoist.
The EHL-1TS hangs from a top hook suspension, so it needs an overhead fixing point or trolley rated for the hoist and the load together. The two fall EHL-1TW has the same 1,000 kg capacity and is the alternative when a two fall chain is wanted. Powerpac has not published the working air pressure, air consumption or a test certificate for the EHL-1TS, so check the Endo manual and your site’s lifting procedures before first use.
Riggers and maintenance crews use this Endo 1 tonne air hoist to lift loads over a 3 m travel. Do not use it to lift people.
| Specification | Details |
|---|---|
| Capacity | 1000 kg |
| Lift | 3 m |
| Power | Compressed air |
| Control | Pull chain |
| Chain | Single fall |
| Suspension | Top hook |
Download your Endo Air Hoist - EHL-1TS 1000kg/3m Lift, Pull Chain Control, Single Fall Chain resources:
Endo Air Hoist - EHL-1TS 1000kg/3m Lift, Pull Chain Control, Single Fall Chain does not have any Safety Data Sheets. Request here
About Endo Air Hoist - EHL-1TS 1000kg/3m Lift, Pull Chain Control, Single Fall Chain
The Endo Air Hoist EHL-1TS is listed for loads up to 1,000 kg with a 3 m lift on a single fall chain. It is a compressed air chain hoist. Choose the EHL-2TW for loads up to 2,000 kg.
Yes. The Endo EHL-1TS is a pneumatic hoist and runs on compressed air. Powerpac has not published its working pressure or air consumption, so check the Endo manual before connecting a compressor.
The Endo EHL-1TS uses pull chain control. The operator pulls the control chain to raise or lower the load. A pendant control version is listed separately as the EHL-1TS PCS-2BV1.
Yes. Air chain hoist and pneumatic hoist are two names for a chain hoist driven by compressed air. The Endo EHL-1TS is one of them.
No. Powerpac sells the Endo EHL-1TS for lifting materials and equipment. Powerpac has not published any rating for lifting people, so do not use it for that.