SKU: 42200
The Bulldog Moil Point Standard 18 inch is a pointed bit for a heavy demolition breaker. It is 18 inches long and has a 1 1/4 inch x 6 inch shank. A moil point concentrates the breaker's impact on a single point, which breaks concrete slabs, footings and rock.
The 1 1/4 inch x 6 inch shank is larger than the 1 inch x 4 1/4 inch shank used on lighter Bulldog bits, so check it against the chuck on your breaker before ordering. Powerpac has not published which breaker models this bit is intended for, so confirm the fit with the breaker maker if you are unsure. A flat chisel in the same shank size is also listed.
Demolition crews and concreters fit this 18 inch Bulldog moil point to a heavy breaker to break thick concrete and rock.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
The Bulldog Moil Point Standard 18 inch is a pointed bit for a heavy demolition breaker. It is 18 inches long and has a 1 1/4 inch x 6 inch shank. A moil point concentrates the breaker’s impact on a single point, which breaks concrete slabs, footings and rock.
The 1 1/4 inch x 6 inch shank is larger than the 1 inch x 4 1/4 inch shank used on lighter Bulldog bits, so check it against the chuck on your breaker before ordering. Powerpac has not published which breaker models this bit is intended for, so confirm the fit with the breaker maker if you are unsure. A flat chisel in the same shank size is also listed.
Demolition crews and concreters fit this 18 inch Bulldog moil point to a heavy breaker to break thick concrete and rock.
| Specification | Details |
|---|---|
| Length | 18 in |
| Shank | 1 1/4 x 6 inch |
| Tip | Moil point |
Download your Bulldog Moil Point - Standard 18"L - 1 1/4" x 6" resources:
Bulldog Moil Point - Standard 18"L - 1 1/4" x 6" does not have any Safety Data Sheets. Request here
About Bulldog Moil Point - Standard 18"L - 1 1/4" x 6"
The Bulldog 42200 moil point is 18 inches long.
A moil point breaks concrete slabs, footings and rock. It is also called a point bit or a pointed chisel.
It has a 1 1/4 inch x 6 inch shank. This is larger than the 1 inch x 4 1/4 inch shank on lighter Bulldog bits, and the two are not interchangeable.
Powerpac has not published a breaker model list for this bit. Check the shank against your breaker chuck, or confirm with the breaker maker.