
SKU: 6193-DB1045
The Dextra Durabar 10 mm GFRP Straight Bar is a 5.8 metre length of glass fibre reinforced polymer rebar, graded at 45 GPa modulus. GFRP rebar, also sold as fibreglass rebar or composite rebar, reinforces concrete without any steel.
Steel rebar rusts in marine and chemical settings. The rust swells, cracks the concrete cover and shortens the life of seawalls, jetties, bridge decks and pool decks. Durabar contains no steel, so it does not corrode.
Dextra states that GFRP rebar is four times lighter than steel, so the 5.8 m lengths are easier to carry and place. The bar cannot be bent on site, so bent shapes come pre-made. Powerpac lists a Durabar 10 mm L-shaped corner bar for that.
Powerpac has not published the tensile strength or the design standard for this bar, so check the Dextra datasheet and the engineer's design before ordering. Concreters and engineers in NZ use Durabar GFRP rebar for flatwork, slabs on grade, footings and coastal concrete where steel would corrode.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
The Dextra Durabar 10 mm GFRP Straight Bar is a 5.8 metre length of glass fibre reinforced polymer rebar, graded at 45 GPa modulus. GFRP rebar, also sold as fibreglass rebar or composite rebar, reinforces concrete without any steel.
Steel rebar rusts in marine and chemical settings. The rust swells, cracks the concrete cover and shortens the life of seawalls, jetties, bridge decks and pool decks. Durabar contains no steel, so it does not corrode.
Dextra states that GFRP rebar is four times lighter than steel, so the 5.8 m lengths are easier to carry and place. The bar cannot be bent on site, so bent shapes come pre-made. Powerpac lists a Durabar 10 mm L-shaped corner bar for that.
Powerpac has not published the tensile strength or the design standard for this bar, so check the Dextra datasheet and the engineer’s design before ordering. Concreters and engineers in NZ use Durabar GFRP rebar for flatwork, slabs on grade, footings and coastal concrete where steel would corrode.
| Specification | Details |
|---|---|
| Diameter | 10 mm |
| Length | 5.8 m |
| Material | Glass fibre reinforced polymer (GFRP) |
| Brand | Dextra Durabar |
| Modulus of elasticity | 45 GPa |
Download your Dextra Durabar™ - 10mm GFRP Straight Bar (5.8m) 45 GPa resources:
Dextra Durabar™ - 10mm GFRP Straight Bar (5.8m) 45 GPa does not have any Safety Data Sheets. Request here
About Dextra Durabar™ - 10mm GFRP Straight Bar (5.8m) 45 GPa
GFRP rebar is reinforcing bar made from glass fibre and resin, and Dextra Durabar 10 mm GFRP Straight Bar contains no steel. Because there is no steel, the bar does not rust. Dextra states that GFRP rebar is four times lighter than steel.
Yes. Fibreglass rebar, glass fibre rebar and composite rebar are other names for GFRP rebar. Dextra Durabar 10 mm GFRP Straight Bar is sold under the GFRP name.
No. Durabar contains no steel, so it does not corrode. Dextra lists seawalls, quays, jetties and bridge pylons as typical uses. The concrete mix and cover still need to meet the engineer's design.
The Dextra Durabar 10 mm GFRP Straight Bar is 5.8 m long and 10 mm in diameter. Its item name gives a 45 GPa modulus. For bends, Powerpac lists a separate L-shaped corner bar.
No. GFRP bars cannot be bent on site, so the manufacturer makes bent shapes. For a corner, Powerpac lists the Durabar 10 mm GFRP L-Shaped Corner Bar, 50 x 50 cm.
Cut Dextra Durabar GFRP rebar with a circular saw fitted with a carborundum blade or a reciprocating saw with a metal-cutting blade. Do not use a torch or bolt cutters. Wear eye protection and a dust mask while cutting.
No. GFRP bar has different properties from steel, so a one-for-one swap at the same size and spacing is not adequate. An engineer must design the reinforcement for the GFRP bar. Powerpac has not published the tensile strength for Durabar 10 mm, so use the Dextra datasheet in that design.
Email us directly at [email protected]
or complete the form below
Email us directly at [email protected]
or complete the form below