SITE
SETUP
SKU: 6197-120.60.60
Smart Block is a Steel Concrete Block Formwork system that can be deployed onsite or at a concrete yard to contain waste concrete & convert to a reusable product.
Due to the design of the interlocking system, there is multiple uses for these block forms to suit many applications.
You can place blocks at 90deg to form a corner, or even stagger these at form a sloped wall profile for retaining structures.
We offer a divider plate insert which enables you to convert a 1.2m x .6m x .6m block form to create a .6m x .6m x .6m block form.
There is a Swiftlift insert penetration in the form or we offer a magnet mount swiftlift & recess former system to make it easy & safe for creating & Handling the finished product.
There is a 17mm chamfer on both edges to give you a tidy finish across all edges.
SmartBlock turns leftover concrete into a reusable, modular building block instead of a disposal cost. Concrete left over from a pour usually just gets tipped, and building retaining walls or corner structures from scratch with new formwork every time is slow and expensive. This steel mould casts a 1200mm x 600mm x 600mm block, and its interlocking design lets blocks be placed at 90 degrees to form a corner or staggered to build a sloped retaining wall profile. A divider plate insert converts one 1.2m block into two 0.6m blocks when a smaller unit is needed. A Swiftlift insert or magnet-mount lifting system makes handling the finished block safe once it's cured. Built from 4mm steel with a 17mm chamfer on every edge for a tidy finish, each mould weighs 150kg and casts a 0.43m³ block. Sites and concrete yards use it to turn waste concrete into a reusable product rather than paying to dispose of it.
SKU: 6197-120.60.60
Need a quote? Simply add to cart and you have the option to request a quote before checkout
Smart Block is a Steel Concrete Block Formwork system that can be deployed onsite or at a concrete yard to contain waste concrete & convert to a reusable product.
Due to the design of the interlocking system, there is multiple uses for these block forms to suit many applications.
You can place blocks at 90deg to form a corner, or even stagger these at form a sloped wall profile for retaining structures.
We offer a divider plate insert which enables you to convert a 1.2m x .6m x .6m block form to create a .6m x .6m x .6m block form.
There is a Swiftlift insert penetration in the form or we offer a magnet mount swiftlift & recess former system to make it easy & safe for creating & Handling the finished product.
There is a 17mm chamfer on both edges to give you a tidy finish across all edges.
SmartBlock turns leftover concrete into a reusable, modular building block instead of a disposal cost. Concrete left over from a pour usually just gets tipped, and building retaining walls or corner structures from scratch with new formwork every time is slow and expensive. This steel mould casts a 1200mm x 600mm x 600mm block, and its interlocking design lets blocks be placed at 90 degrees to form a corner or staggered to build a sloped retaining wall profile. A divider plate insert converts one 1.2m block into two 0.6m blocks when a smaller unit is needed. A Swiftlift insert or magnet-mount lifting system makes handling the finished block safe once it’s cured. Built from 4mm steel with a 17mm chamfer on every edge for a tidy finish, each mould weighs 150kg and casts a 0.43m³ block. Sites and concrete yards use it to turn waste concrete into a reusable product rather than paying to dispose of it.
SKU: 6197-120.60.60
| Specification | Details |
|---|---|
| Length | 1200 mm |
| Width | 600 mm |
| Height | 600 mm |
| Thickness | 4 mm |
| Weight | 150 kg |
| Volume | 0.43 m³ |
| Material | Steel, 17mm chamfer all edges |
Download your SmartBlock - Concrete Block Mould resources:
SmartBlock - Concrete Block Mould does not have any Safety Data Sheets. Request here
About SmartBlock - Concrete Block Mould
1200mm x 600mm x 600mm, a volume of 0.43m³.
Yes, a divider plate insert converts the mould into two 0.6m x 0.6m x 0.6m blocks.
The interlocking design lets blocks sit at 90 degrees to form a corner, or staggered to build a sloped retaining wall profile.
Through a Swiftlift insert penetration in the mould, or a magnet-mount Swiftlift and recess former system.
4mm steel, with a 17mm chamfer across all edges for a tidy finish.
150kg.
Yes, it's designed for deployment either on site or at a concrete yard.
