SKU: 6192-CSAH60
Concrete Spacer - High Load - 60mm Cover - 50pk (6192-CSAH60) is a cement-based spacer that holds reinforcing steel 60mm from the formwork. It is sold as the high load spacer, and each pack holds 50 spacers.
The spacer is made from a mix of OPC, GBS, GGBS, fibres and additives. The manufacturer's data sheet lists compressive strength not less than M60, water absorption under 5% and deflection under load under 1mm.
The same data sheet lists a very low rapid chloride penetration result, chloride content under 0.3 kg/m3 and alkali silica reactivity as harmless. A pack weighs 18.8kg.
Reinforcing fixers and concreters use the high load spacer, also called a concrete spacer or cover block, to set 60mm cover under heavier reinforcement on commercial, industrial and civil pours.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
Concrete Spacer – High Load – 60mm Cover – 50pk (6192-CSAH60) is a cement-based spacer that holds reinforcing steel 60mm from the formwork. It is sold as the high load spacer, and each pack holds 50 spacers.
The spacer is made from a mix of OPC, GBS, GGBS, fibres and additives. The manufacturer’s data sheet lists compressive strength not less than M60, water absorption under 5% and deflection under load under 1mm.
The same data sheet lists a very low rapid chloride penetration result, chloride content under 0.3 kg/m3 and alkali silica reactivity as harmless. A pack weighs 18.8kg.
Reinforcing fixers and concreters use the high load spacer, also called a concrete spacer or cover block, to set 60mm cover under heavier reinforcement on commercial, industrial and civil pours.
| Specification | Details |
|---|---|
| Cover | 60 mm |
| Pack Quantity | 50 pk |
| Pack Weight | 18.8 kg |
| Compressive Strength | M60 minimum |
| Water Absorption | under 5 % |
Download your Concrete Spacer - High Load - 60mm Cover - 50pk resources:
Concrete Spacer - High Load - 60mm Cover - 50pk does not have any Safety Data Sheets. Request here
About Concrete Spacer - High Load - 60mm Cover - 50pk
The Concrete Spacer High Load 60mm gives 60mm of cover between the reinforcing steel and the formwork. Each pack of 6192-CSAH60 holds 50 spacers.
Powerpac has not published a load rating for this spacer. The manufacturer's data sheet lists compressive strength not less than M60 and deflection under load under 1mm. Check the load with your engineer before you specify it.
It is made from a mix of OPC, GBS, GGBS, fibres and additives. This is the composition on the manufacturer's technical data sheet.
The data sheet lists chloride content under 0.3 kg/m3 and a very low rapid chloride penetration result. It also lists a chloride migration coefficient under 3.5x10-12 m2/s.
A pack of 50 spacers weighs 18.8kg on the NetSuite item record. Allow for that weight when you plan handling and delivery.
Yes. Concrete spacer and cover block are names for the same product. The Concrete Spacer High Load 60mm sets 60mm cover.