SKU: KPZ080160
SDS Plus Masonry Drill Bit 8mm x 160mm is a hammer-drill bit for drilling plug and fixing holes in concrete, masonry and stone. Reinforced concrete, natural stone and dense masonry blunt an ordinary bit quickly, and a bit that clogs with dust or wanders off-centre risks a badly placed fixing. This bit uses a TURBOHEAD Xpro full carbide head with a 4-cutting-edge design and a centering tip, so it starts precisely and cuts through reinforced concrete without wandering. The MS5 flute with a reinforced core clears drilling dust fast and resists the twisting and vibration forces of hammer drilling, giving the bit a longer service life. Chrome-nickel-molybdenum steel construction is shot-peened and hardened, with the carbide head brazed on at around 1,120°C for a bond that holds under heavy use. It fits directly into SDS-plus and HILTI TE-C drive hammer drills, and its low-vibration design meets the EU vibration protection directive for hand-arm safety. At 8mm diameter and 160mm long, tradies and concrete contractors reach for this size wherever plugs, anchors or fixings need to go into artificial stone, masonry, natural stone or reinforced concrete.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
SDS Plus Masonry Drill Bit 8mm x 160mm is a hammer-drill bit for drilling plug and fixing holes in concrete, masonry and stone. Reinforced concrete, natural stone and dense masonry blunt an ordinary bit quickly, and a bit that clogs with dust or wanders off-centre risks a badly placed fixing. This bit uses a TURBOHEAD Xpro full carbide head with a 4-cutting-edge design and a centering tip, so it starts precisely and cuts through reinforced concrete without wandering. The MS5 flute with a reinforced core clears drilling dust fast and resists the twisting and vibration forces of hammer drilling, giving the bit a longer service life. Chrome-nickel-molybdenum steel construction is shot-peened and hardened, with the carbide head brazed on at around 1,120°C for a bond that holds under heavy use. It fits directly into SDS-plus and HILTI TE-C drive hammer drills, and its low-vibration design meets the EU vibration protection directive for hand-arm safety. At 8mm diameter and 160mm long, tradies and concrete contractors reach for this size wherever plugs, anchors or fixings need to go into artificial stone, masonry, natural stone or reinforced concrete.
| Specification | Details |
|---|---|
| Diameter | 8 mm |
| Length | 160 mm |
| Weight | 0.05 kg |
| Material | Chrome-Nickel-Molybdenum Steel, TURBOHEAD Xpro Full Carbide Head |
Download your SDS Plus Masonry Drill Bit 8mm x 160mm resources:
SDS Plus Masonry Drill Bit 8mm x 160mm does not have any Safety Data Sheets. Request here
About SDS Plus Masonry Drill Bit 8mm x 160mm
It fits directly into SDS-plus and HILTI TE-C drive hammer drills.
8mm diameter by 160mm long, weighing 0.05kg.
Powerpac also stocks 8mm bits at 210mm and 260mm long, plus a 10-pack of this 160mm size (KPZ080160-10).
Artificial stone, masonry, natural stone and reinforced concrete.