SDS Plus Masonry Drill Bit 10mm x 310mm

Description

SDS Plus Masonry Drill Bit 10mm x 310mm is a hammer-drill bit for drilling plug and fixing holes in concrete, masonry and stone. Reinforced concrete, natural stone and dense masonry blunt an ordinary bit quickly, and a bit that clogs with dust or wanders off-centre risks a badly placed fixing. This bit uses a TURBOHEAD Xpro full carbide head with a 4-cutting-edge design and a centering tip, so it starts precisely and cuts through reinforced concrete without wandering. The MS5 flute with a reinforced core clears drilling dust fast and resists the twisting and vibration forces of hammer drilling, giving the bit a longer service life. Chrome-nickel-molybdenum steel construction is shot-peened and hardened, with the carbide head brazed on at around 1,120°C for a bond that holds under heavy use. It fits directly into SDS-plus and HILTI TE-C drive hammer drills, and its low-vibration design meets the EU vibration protection directive for hand-arm safety. At 10mm diameter and 310mm long, tradies and concrete contractors reach for this longest size wherever the deepest plug, anchor or fixing hole is needed in artificial stone, masonry, natural stone or reinforced concrete.