M-F 7:30am to 5pm

THE FUTURE OF EXPANSION JOINT FILLER SOLUTIONS

FUTUREFLEX

WHAT IS
FUTUREFLEX?

FutureFlex is a self-wound adhesive backed joint filler made from physically cross-linked polyolefin foam. This low-cost, inert foam material is easy to use and doesn’t require any release paper. Its closed-cell structure makes it ideal for use as an expansion joint, providing superior resilience and chemical resistance.

Powerpac’s FutureFlex range of expansion foam comes with both adhesive and non-adhesive backing, and is available in roll form of 75mm, 100mm, 125mm, 150mm, 200mm, 250mm and 300mm high.

REQUEST A SITE VISIT

Do you need an on-site demonstration? Book your site visit now.

BOOK VISIT

COMPRESSIBLE & NON-ABSORBENT

FutureFlex’s compressibility enables it to absorb movement and stress, making it an ideal solution for expansion joint filling. Additionally, being non-absorbent means FutureFlex is resistant to moisture, preventing water damage and other related problems.

EASILY CUT TO REQUIRED SIZE

FutureFlex allows for fast and efficient installation, saving both time and labor costs. This also makes it ideal for projects with custom requirements, as it can be easily tailored to specific dimensions.

FUTUREPROOF - WON'T ROT

FutureFlex is an inert, closed-cell foam material that won’t rot, ensuring that your expansion joints remain protected for years to come. With FutureFlex, you can be confident that your investment in joint protection will last and continue to provide reliable performance.

 

RECOVERS AFTER COMPRESSION

FutureFlex’s closed-cell structure allows it to recover its shape and size after compression, making it an excellent choice for expansion joints that are subjected to compression forces. This feature ensures that FutureFlex maintains its effectiveness and durability over the long term.

FUTUREFLEX PRODUCTS

FUTUREFLEX PRODUCTS

PROPERTY TYPICAL VALUE TEST METHOD
Density 25 kg/m3 (nominal) Internal
Tensile Strength 3.3 kg/cm2 (longitudinal) JIS K6767
1.8 kg/cm2 (crosswise)
Elongation 240% (longitudinal) JIS K6767
140% (crosswise)
Tear Strength 2.0 kg/cm (longitudinal) JIS K6767
1.3 kg/cm (crosswise)
Compression Strength 0.30 kg/cm2 @ 25% deflection Internal
0.85 kg/cm2 @ 50% deflection
Hot Sealant Penetration Zero RTA T1154
Extrusion during Compression 1.3 mm ASTM D545
Recovery After Compression 100% after 10 minutes ASTM D545
Water Absorption 0.09 mg/cm² JIS K6767
Water Vapour Permeability 5.7 x 10-14 kg/s.m.Pa ASTM E96
Join our newsletter and get 20% discount
Promotion nulla vitae elit libero a pharetra augue