SKU: KPZ180450
SDS Plus Masonry Drill Bit 18mm x 450mm is a hammer-drill bit for drilling deep, large-diameter plug and fixing holes in concrete, masonry and stone. Reinforced concrete, natural stone and dense masonry blunt an ordinary bit quickly, and a bit that clogs with dust or wanders off-centre risks a badly placed fixing. This bit uses a TURBOHEAD Xpro full carbide head with a 4-cutting-edge design and a centering tip, so it starts precisely and cuts through reinforced concrete without wandering, even over its longer 450mm reach. The MS5 flute with a reinforced core clears drilling dust fast and resists the twisting and vibration forces of hammer drilling, giving the bit a longer service life. Chrome-nickel-molybdenum steel construction is shot-peened and hardened, with the carbide head brazed on at around 1,120°C for a bond that holds under heavy use. It fits directly into SDS-plus and HILTI TE-C drive hammer drills, and its low-vibration design meets the EU vibration protection directive for hand-arm safety. At 18mm diameter and 450mm long, tradies and concrete contractors reach for this size wherever a deep, large-diameter fixing hole is needed in artificial stone, masonry, natural stone or reinforced concrete.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
SDS Plus Masonry Drill Bit 18mm x 450mm is a hammer-drill bit for drilling deep, large-diameter plug and fixing holes in concrete, masonry and stone. Reinforced concrete, natural stone and dense masonry blunt an ordinary bit quickly, and a bit that clogs with dust or wanders off-centre risks a badly placed fixing. This bit uses a TURBOHEAD Xpro full carbide head with a 4-cutting-edge design and a centering tip, so it starts precisely and cuts through reinforced concrete without wandering, even over its longer 450mm reach. The MS5 flute with a reinforced core clears drilling dust fast and resists the twisting and vibration forces of hammer drilling, giving the bit a longer service life. Chrome-nickel-molybdenum steel construction is shot-peened and hardened, with the carbide head brazed on at around 1,120°C for a bond that holds under heavy use. It fits directly into SDS-plus and HILTI TE-C drive hammer drills, and its low-vibration design meets the EU vibration protection directive for hand-arm safety. At 18mm diameter and 450mm long, tradies and concrete contractors reach for this size wherever a deep, large-diameter fixing hole is needed in artificial stone, masonry, natural stone or reinforced concrete.
| Specification | Details |
|---|---|
| Diameter | 18 mm |
| Length | 450 mm |
| Weight | 0.5 kg |
| Material | Chrome-Nickel-Molybdenum Steel, TURBOHEAD Xpro Full Carbide Head |
Download your SDS Plus Masonry Drill Bit 18mm x 450mm resources:
SDS Plus Masonry Drill Bit 18mm x 450mm does not have any Safety Data Sheets. Request here
About SDS Plus Masonry Drill Bit 18mm x 450mm
It fits directly into SDS-plus and HILTI TE-C drive hammer drills.
18mm diameter by 450mm long, weighing 0.5kg.
Yes, Powerpac also stocks an 18mm x 250mm bit (KPZ180250) for shallower holes.
Artificial stone, masonry, natural stone and reinforced concrete.