Express 3 Hour Delivery
Express 5 Hour Delivery
Express Next Day Delivery
Courier Delivery
Collect From Warehouse

Endo Spring Balancer 1-3kg cap. 1.3m Travel 1-3kg x 1.3m

SKU: EWS-3

$392.68 + GST

The Endo Spring Balancer EWS-3 supports a tool or load of 1 to 3 kg and gives 1.3 m of cable travel. It hangs from an overhead point, takes the weight of the load and retracts the cable when the load is released. Workshop and site crews call this type of unit a tool balancer or a load balancer.

A spring balancer works inside a set capacity range. The EWS-3 is listed for 1 to 3 kg, so the tool and anything it carries, such as a hose or cable, must fall inside that range. The EWS-3 weighs 2 kg. It must hang from a fixing point or trolley that can carry the balancer and the load together. Powerpac has not published a working load limit or test certificate for this model, so check the Endo manual before use.

Assembly teams hang this 1 to 3 kg Endo spring balancer over a workstation to support a light tool. Typical loads are light hand-held tools.

Read more

Key Specs

  • Capacity: 1-3kg
  • Travel: 1.3m
  • Weight: 2kg
See All Specifications
In Stock

Need a quote? Simply add to cart and you have the option to request a quote before checkout

What is Endo Spring Balancer 1-3kg cap. 1.3m Travel?

The Endo Spring Balancer EWS-3 supports a tool or load of 1 to 3 kg and gives 1.3 m of cable travel. It hangs from an overhead point, takes the weight of the load and retracts the cable when the load is released. Workshop and site crews call this type of unit a tool balancer or a load balancer.

A spring balancer works inside a set capacity range. The EWS-3 is listed for 1 to 3 kg, so the tool and anything it carries, such as a hose or cable, must fall inside that range. The EWS-3 weighs 2 kg. It must hang from a fixing point or trolley that can carry the balancer and the load together. Powerpac has not published a working load limit or test certificate for this model, so check the Endo manual before use.

Assembly teams hang this 1 to 3 kg Endo spring balancer over a workstation to support a light tool. Typical loads are light hand-held tools.

Benefits

  • Supports a 1 to 3 kg tool or load with the Endo Spring Balancer EWS-3
  • Gives 1.3 m of cable travel for work at a bench or station
  • Retracts the cable when the load is released, so the tool returns to its hanging height
  • Weighs 2 kg for fitting at a workstation
  • Sits in the Endo EWS range, with neighbouring models for slightly heavier tools
  • Can help reduce the strain of holding a light tool up for a full shift

Technical Specifications

Specification Details
Capacity 1-3 kg
Travel 1.3 m
Weight 2 kg

Resources

Download your Endo Spring Balancer 1-3kg cap. 1.3m Travel resources:

  • Safety Data Sheet

    Endo Spring Balancer 1-3kg cap. 1.3m Travel does not have any Safety Data Sheets. Request here

PowerPac Expert

Need an Expert?

We're here to help you with any questions you have on Endo Spring Balancer 1-3kg cap. 1.3m Travel.

Frequently Asked Questions

About Endo Spring Balancer 1-3kg cap. 1.3m Travel

Join our newsletter and get 20% discount
Promotion nulla vitae elit libero a pharetra augue