SKU: 6132-SSDBKIT6
The Site Shield Dust Barrier Pole Kit is a temporary dust barrier system with six spring-loaded telescoping poles that extend from 1.2 to 3.8 metres. The kit also holds two heavy-duty self-adhesive zips and a carry bag. Crews set the poles between floor and ceiling, stretch polythene sheeting between them and have a dust barrier wall up in minutes, without tape, ladders or ceiling damage.
The spring-loaded heads compress against the ceiling and hold the polythene with non-skid, non-marking grip pads top and bottom. One person can set up the whole run. The zips stick on after the polythene is up and are slit through to make an entry that opens and closes without losing the seal.
Six poles cover about 12 metres of straight barrier, or a three-sided room with two poles spare. The 4-pole kit (6132-SSDBKIT4) suits shorter runs. Polythene sheeting is sold separately, such as Site Shield Clear Polythene (6131-CPS425020 for 25 m and 6131-CPS450 for 50 m).
Painters, Gib stoppers, flooring crews, restoration teams and asbestos crews use this kit to seal off work in occupied buildings.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
The Site Shield Dust Barrier Pole Kit is a temporary dust barrier system with six spring-loaded telescoping poles that extend from 1.2 to 3.8 metres. The kit also holds two heavy-duty self-adhesive zips and a carry bag. Crews set the poles between floor and ceiling, stretch polythene sheeting between them and have a dust barrier wall up in minutes, without tape, ladders or ceiling damage.
The spring-loaded heads compress against the ceiling and hold the polythene with non-skid, non-marking grip pads top and bottom. One person can set up the whole run. The zips stick on after the polythene is up and are slit through to make an entry that opens and closes without losing the seal.
Six poles cover about 12 metres of straight barrier, or a three-sided room with two poles spare. The 4-pole kit (6132-SSDBKIT4) suits shorter runs. Polythene sheeting is sold separately, such as Site Shield Clear Polythene (6131-CPS425020 for 25 m and 6131-CPS450 for 50 m).
Painters, Gib stoppers, flooring crews, restoration teams and asbestos crews use this kit to seal off work in occupied buildings.
| Specification | Details |
|---|---|
| Extension | 1.2m - 3.8m |
| Poles | 6 |
| Zips | 2 |
| Carry Bag | 1 |
Download your Site Shield - Dust Barrier Pole Kit resources:
Site Shield - Dust Barrier Pole Kit does not have any Safety Data Sheets. Request here
About Site Shield - Dust Barrier Pole Kit
Polythene sheeting. The kit gives you poles, zips and a bag, but not the plastic that forms the actual barrier. Most jobs use the Site Shield Clear Polythene 4m × 25m (6131-CPS425020) or 4m × 50m (6131-CPS450). That's it — nothing else needed for a standard barrier.
Roughly 12 metres of straight wall if you space the poles every 2 metres, which is the practical max. You can also use six poles to build a three-sided room-within-a-room with two left over, or two separate barriers in different rooms.
No. The spring-loaded heads use non-skid, non-marking pads. They press against the ceiling firmly enough to hold the barrier in place, but they don't scratch, mark or dent painted gib or acoustic tile. The same goes for the base pads on the floor.
Yes. That's the whole point of spring-loaded poles. You compress the head, position it floor to ceiling, release the spring, then move to the next one. Polythene goes up with the poles. No ladder, no second person holding plastic while you tape.
Three things. Faster — a full barrier goes up in minutes, not the better part of an hour. No damage — taped plastic pulls paint off and leaves residue. Reusable — the poles fold back into the carry bag and come with you to the next job, where taping plastic gives you nothing to take away.
This kit tops out at 3.8m. For taller ceilings — commercial atriums, warehouses, anything above a standard office or residential height — talk to our team about the Zipwall Spring Loaded Poles (ZIPST2) which extend to 6.1m.
Yes. The poles, carry bag and grip pads are designed for repeat use across multiple jobs. The zips are self-adhesive and single-use — they bond to the polythene when you put them up, and the polythene gets binned with the zips still attached when the job's done. Order extra zips (6132-DBZK) to keep on hand.
Six is right for full-room enclosures, longer runs and crews running multiple barriers across a job. Four (6132-SSDBKIT4) is the lighter option for smaller jobs, shorter runs and one-off rooms. Most fitout and refurb teams end up with the 6-pack because of the room-within-a-room flexibility.
Yes. Zip pole kit, spring loaded pole kit, dust barrier poles and containment pole kit are all names used for this category of product.
Site Shield - Dust Barrier Pole Kit
We suggest following the steps above for the best installation results. If you have any questions or need assistance, our team is here to help.