SKU: TB31ZG
Tilt Panel Prop 1.9m to 3.1m Size 1 stabilises vertical wall panels and formwork during concrete pouring, working in both compression and traction where a standard prop only pushes. A prop that only resists compression can't stop a panel leaning back once it's stood up, leaving it to shift during the pour. This Amadio double-action prop resolves that by working both ways, holding panels steady through pouring and during prefabrication assembly. Its shaped, un-loosable pin seats easily and safely, and its hand safety system keeps a minimum 100mm of free length in the closed position to protect the operator's hand from crushing. Supplied fully hot dip galvanised with a forged steel winder nut, it's built to avoid the fracturing that weaker cast nuts suffer. Builders reach for it wherever a vertical panel needs positive stabilising in both directions.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
Tilt Panel Prop 1.9m to 3.1m Size 1 stabilises vertical wall panels and formwork during concrete pouring, working in both compression and traction where a standard prop only pushes. A prop that only resists compression can’t stop a panel leaning back once it’s stood up, leaving it to shift during the pour. This Amadio double-action prop resolves that by working both ways, holding panels steady through pouring and during prefabrication assembly. Its shaped, un-loosable pin seats easily and safely, and its hand safety system keeps a minimum 100mm of free length in the closed position to protect the operator’s hand from crushing. Supplied fully hot dip galvanised with a forged steel winder nut, it’s built to avoid the fracturing that weaker cast nuts suffer. Builders reach for it wherever a vertical panel needs positive stabilising in both directions.
| Specification | Details |
|---|---|
| Extension Range | 1.9 - 3.1 m |
| Inner Tube Diameter | 48.3 mm |
| Weight | 15.8 kg |
| Steel Grade | S235JRh |
| Finish | Hot Dip Galvanised |
Download your Tilt Panel Prop - 1.9m - 3.1m Size 1 resources:
Tilt Panel Prop - 1.9m - 3.1m Size 1 does not have any Safety Data Sheets. Request here
About Tilt Panel Prop - 1.9m - 3.1m Size 1
1.9m to 3.1m, weighing 15.8kg.
Working in compression and traction lets it both push and hold back a panel, keeping it stable through the pour.
It keeps a minimum 100mm of free length in the inner tube when closed, avoiding crushing during adjustment.
Yes, with a Tilt Prop Adaptor and additional winder, though a purpose-built tilt panel prop is supplied ready to use.