SKU: KPZ140600
SDS Plus Masonry Drill Bit 14mm x 600mm is an extra-long hammer-drill bit for drilling deep plug and fixing holes in concrete, masonry and stone. Reaching through thick walls or deep into reinforced concrete calls for a bit long enough to finish the hole in one pass, and reinforced concrete, natural stone and dense masonry blunt an ordinary bit quickly along the way. This bit uses a TURBOHEAD Xpro full carbide head with a 4-cutting-edge design and a centering tip, so it starts precisely and cuts through reinforced concrete without wandering, even over its full 600mm reach. The MS5 flute with a reinforced core clears drilling dust fast and resists the twisting and vibration forces of hammer drilling, giving the bit a longer service life. Chrome-nickel-molybdenum steel construction is shot-peened and hardened, with the carbide head brazed on at around 1,120°C for a bond that holds under heavy use. It fits directly into SDS-plus and HILTI TE-C drive hammer drills, and its low-vibration design meets the EU vibration protection directive for hand-arm safety. At 14mm diameter and 600mm long, tradies and concrete contractors reach for this bit for through-wall drilling and deep service penetrations in artificial stone, masonry, natural stone or reinforced concrete.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
SDS Plus Masonry Drill Bit 14mm x 600mm is an extra-long hammer-drill bit for drilling deep plug and fixing holes in concrete, masonry and stone. Reaching through thick walls or deep into reinforced concrete calls for a bit long enough to finish the hole in one pass, and reinforced concrete, natural stone and dense masonry blunt an ordinary bit quickly along the way. This bit uses a TURBOHEAD Xpro full carbide head with a 4-cutting-edge design and a centering tip, so it starts precisely and cuts through reinforced concrete without wandering, even over its full 600mm reach. The MS5 flute with a reinforced core clears drilling dust fast and resists the twisting and vibration forces of hammer drilling, giving the bit a longer service life. Chrome-nickel-molybdenum steel construction is shot-peened and hardened, with the carbide head brazed on at around 1,120°C for a bond that holds under heavy use. It fits directly into SDS-plus and HILTI TE-C drive hammer drills, and its low-vibration design meets the EU vibration protection directive for hand-arm safety. At 14mm diameter and 600mm long, tradies and concrete contractors reach for this bit for through-wall drilling and deep service penetrations in artificial stone, masonry, natural stone or reinforced concrete.
| Specification | Details |
|---|---|
| Diameter | 14 mm |
| Length | 600 mm |
| Weight | 0.32 kg |
| Material | Chrome-Nickel-Molybdenum Steel, TURBOHEAD Xpro Full Carbide Head |
Download your SDS Plus Masonry Drill Bit 14mm x 600mm resources:
SDS Plus Masonry Drill Bit 14mm x 600mm does not have any Safety Data Sheets. Request here
About SDS Plus Masonry Drill Bit 14mm x 600mm
It fits directly into SDS-plus and HILTI TE-C drive hammer drills.
14mm diameter by 600mm long, weighing 0.32kg.
Powerpac also stocks 14mm bits at 160mm, 210mm, 260mm and 310mm long for shallower holes.
Artificial stone, masonry, natural stone and reinforced concrete.