SKU: CS4020
The CS4020 Circular Concrete Spacer holds reinforcing bar 40mm from the formwork face. It fits 16mm to 20mm bar, so it suits the mid-sized reinforcement used in columns, walls, beams and piles.
A circular spacer clips or threads around the bar, which makes it a good choice where bar runs vertically or at an angle and a flat chair cannot sit on the ground. Fixing a row of spacers along each bar gives you a consistent 40mm cover to the face of the pour. Builders also call it a wheel spacer, a bar spacer or a cover spacer.
Powerpac supplies the CS4020 for NZ concrete contractors and builders who need dependable cover on vertical and sloping reinforcement.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
The CS4020 Circular Concrete Spacer holds reinforcing bar 40mm from the formwork face. It fits 16mm to 20mm bar, so it suits the mid-sized reinforcement used in columns, walls, beams and piles.
A circular spacer clips or threads around the bar, which makes it a good choice where bar runs vertically or at an angle and a flat chair cannot sit on the ground. Fixing a row of spacers along each bar gives you a consistent 40mm cover to the face of the pour. Builders also call it a wheel spacer, a bar spacer or a cover spacer.
Powerpac supplies the CS4020 for NZ concrete contractors and builders who need dependable cover on vertical and sloping reinforcement.
| Specification | Details |
|---|---|
| Cover | 40 mm |
| Bar Diameter | 16 - 20 mm |
Download your Circular Concrete Spacer 40mm Cover 16 - 20mm Bar resources:
Circular Concrete Spacer 40mm Cover 16 - 20mm Bar does not have any Safety Data Sheets. Request here
About Circular Concrete Spacer 40mm Cover 16 - 20mm Bar
The CS4020 fits 16mm to 20mm reinforcing bar. Use the 6192-CS5012 if you are tying 5mm to 12mm bar or wire.
The CS4020 gives 40mm of cover between the bar and the formwork face.
Use a circular spacer on vertical or angled bar, such as column and wall steel. A chair needs a flat surface to sit on, so chairs suit slabs and ground work.
Yes. Wheel spacer, bar spacer and cover spacer are common trade names for the same type of product.
Spacing is set by your engineer's drawings and the project specification. Follow those documents for spacing and cover on each element.