SKU: SW48
The Scaffold Coupler Swivel 360 (SW48) clamps two scaffold tubes together at any angle. It is a two-piece coupler with captive Tee bolts. It is also called a swivel clamp or adjustable coupler.
Bracing and diagonal members rarely meet the frame at 90 degrees. A swivel coupler rotates through 360 degrees, so a brace can join a standard or ledger at whatever angle the frame needs.
Powerpac lists the SW48 as load bearing for tying and bracing. It has not published a safe working load, so check the rating with your scaffolder before specifying it.
Scaffolders and builders in NZ use swivel couplers for bracing, tie-backs and angled members.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
The Scaffold Coupler Swivel 360 (SW48) clamps two scaffold tubes together at any angle. It is a two-piece coupler with captive Tee bolts. It is also called a swivel clamp or adjustable coupler.
Bracing and diagonal members rarely meet the frame at 90 degrees. A swivel coupler rotates through 360 degrees, so a brace can join a standard or ledger at whatever angle the frame needs.
Powerpac lists the SW48 as load bearing for tying and bracing. It has not published a safe working load, so check the rating with your scaffolder before specifying it.
Scaffolders and builders in NZ use swivel couplers for bracing, tie-backs and angled members.
| Specification | Details |
|---|---|
| Tube size | 48.3 mm |
| Swivel | 360 degrees |
| Weight | 1 kg |
Download your Scaffold Coupler - Swivel 360 resources:
Scaffold Coupler - Swivel 360 does not have any Safety Data Sheets. Request here
About Scaffold Coupler - Swivel 360
The SW48 clamps two scaffold tubes together at any angle. It swivels 360 degrees before tightening.
A swivel coupler joins tubes at any angle. A fixed coupler holds tubes at 90 degrees only. Powerpac also lists the FX48 fixed 90 coupler.
Powerpac lists the SW48 as load bearing for tying and bracing.
Powerpac has not published a safe working load for this coupler. Check the rating with your scaffolder before specifying it.