SKU: FX48
The Scaffold Coupler Fixed 90 (FX48) is a right angle coupler that clamps one scaffold tube to another at 90 degrees. It is also called a double coupler or right angle coupler.
Tube and coupler scaffold depends on joints that do not move. A fixed coupler locks two tubes at a right angle, such as a ledger to a standard, so the frame keeps its shape under load.
The FX48 suits 48.3 mm scaffold tube, the common 40NB size. Powerpac has not published a safe working load for this coupler, so check the rating with your scaffolder before using it in a load-bearing joint.
Scaffolders and builders in NZ use fixed couplers to connect ledgers, transoms and standards.
Need a quote? Simply add to cart and you have the option to request a quote before checkout
The Scaffold Coupler Fixed 90 (FX48) is a right angle coupler that clamps one scaffold tube to another at 90 degrees. It is also called a double coupler or right angle coupler.
Tube and coupler scaffold depends on joints that do not move. A fixed coupler locks two tubes at a right angle, such as a ledger to a standard, so the frame keeps its shape under load.
The FX48 suits 48.3 mm scaffold tube, the common 40NB size. Powerpac has not published a safe working load for this coupler, so check the rating with your scaffolder before using it in a load-bearing joint.
Scaffolders and builders in NZ use fixed couplers to connect ledgers, transoms and standards.
| Specification | Details |
|---|---|
| Tube size | 48.3 mm |
| Angle | 90 degrees |
Download your Scaffold Coupler - Fixed 90 resources:
Scaffold Coupler - Fixed 90 does not have any Safety Data Sheets. Request here
About Scaffold Coupler - Fixed 90
The FX48 clamps two scaffold tubes together at a fixed right angle.
The FX48 suits 48.3 mm scaffold tube, also called 40NB.
A fixed coupler holds tubes at 90 degrees only. A swivel coupler rotates to join tubes at any angle. Powerpac also lists the SW48 swivel coupler.
Powerpac has not published a safe working load for this coupler. Check the rating with your scaffolder before using it in a load-bearing joint.